To buy a replica Constellation 131.20 you must match the real reference's dimensions before price or photos: the 131.20 family ships in 25 mm, 28 mm, 33 mm and 36 mm cases, in Moonshine Gold and steel, on an integrated mono-rang bracelet. The best replicas name the exact sub-reference, the case diameter and the movement type. Shopping by picture alone is how buyers end up with the wrong size, the wrong gold tone and a bracelet that will not sit flush against the lugs.
Omega Constellation 131.20 Replica for Sale
What does reference 131.20 actually cover?
The 131.20 number identifies Omega's Constellation Manhattan line in a gold and steel case, usually with diamonds on the bezel or the dial. The first block is the family (131 = Constellation), the next block is case material, and the remaining digits encode case size, movement and dial. Moonshine Gold is Omega's own 18K alloy, visibly paler than classic yellow gold, and that exact tone is the hardest detail for a replica factory to copy.
Constellation 131.20 Super Clone
Smaller references such as the 28 mm models run a quartz Calibre 4061 with no date and a flat, thin profile. The 33 mm and 36 mm versions use automatic Co-Axial movements with a date window at 6 o'clock, so the case is thicker and the dial layout differs.
How do you choose a good 131.20 replica?
Decide your case size first, then your movement, then your finish level. Everything else is negotiable; these three are not.
buy replica constellation 131.20
- Pick the diameter that fits your wrist: 25 mm and 28 mm read as a dress watch, 33 mm and 36 mm read as a unisex daily wearer.
- Choose quartz if you want the correct thin profile on a 25 mm or 28 mm build, and automatic if you want the sweeping seconds of a 33 mm or 36 mm.
- Ask for the sub-reference number and confirm the seller's case dimensions match it within a fraction of a millimeter.
- Request real photos of the caseback, clasp and lug-to-bracelet transition, not catalog renders.
Key parameters to verify before paying
- Case diameter and thickness: a 28 mm replica should not measure 30 mm, and a quartz model should not carry an automatic case's bulk.
- Movement: quartz for small sizes, a cloned automatic with a date for 33 mm and 36 mm.
- Gold tone: Moonshine Gold is pale, not orange; plating should be thick enough to resist wear at the clasp and crown.
- Bracelet: tapered mono-rang links, a butterfly or hidden clasp, and tight end links with no rattle.
- Dial details: the applied star, the claws at 3 and 9 o'clock, and diamond settings that sit level rather than raised.
- Water resistance: 50 m is the real rating, so a gasket seal and a screw-down caseback are reasonable expectations.
Pitfalls that cost buyers the most
Grade labels such as AAA, 1:1 and super clone are marketing words, not standards. A seller who refuses to photograph the movement or the caseback is hiding the two things you cannot judge from the front.
- Buying a 33 mm automatic build and assuming it will wear like a 28 mm quartz.
- Accepting cubic zirconia on a model that should carry a brighter stone setting.
- Ignoring customs and trademark risk: counterfeit watches can be seized at import, and trafficking in counterfeit goods is a federal offense in the United States.
- Paying a gold-model price for a thinly plated case that will fade within months.
How much should a replica Constellation 131.20 cost?
Quartz 25 mm and 28 mm builds sit at the lower end, while 33 mm and 36 mm automatics with heavier gold plating and stone settings cost more. Treat any price far below the tier norm as a warning about the movement inside.
Is buying a replica watch legal in the United States?
No. Counterfeit watches infringe Omega's trademarks, and importing them for personal use or resale carries seizure and legal exposure. That risk is part of the total cost, not a footnote.