Buying a Grey Side of the Moon super clone comes down to three things: the movement inside, the case material and finish, and the dial details. A top-tier replica will use a clone of the Omega 9300 movement or a highly modified A7750, a ceramic case that matches the genuine grey tone, and a dial with correct subdial spacing and lume. Cheap versions cut corners on all three. Focus on those specs and buy from a seller who provides real photos and a return policy.

best grey side of the moon fake

What to Look For in a Grey Side of the Moon Super Clone

Movement

The genuine Omega Speedmaster Grey Side of the Moon runs on the calibre 9300, a co-axial chronograph. Super clones either use a custom clone of this movement or a modified Valjoux 7750 (A7750). The clone 9300 offers a smooth sweep and correct subdial functions for chronograph minutes and hours. A7750-based replicas can be reliable but have a stuttering chronograph seconds hand and a thicker case. Ask the seller which movement is used and whether the subdials work as intended.

how good is the grey side of the moon replica

Case and Bezel

The genuine case is made of grey ceramic, specifically zirconium oxide, with a mix of brushed and polished surfaces. High-end replicas use ceramic or a ceramic-coated steel. Ceramic is lighter and scratch-resistant but can shatter if dropped. Steel replicas are heavier and may chip. Check photos for sharp edges and consistent brushing.

Where to Buy Grey Side of the Moon Clone Watches

Dial and Hands

The grey dial has black subdials at 3 and 9 o'clock, a date window at 6, and applied metal indexes. Super clones should have the correct font for Omega and Speedmaster, and the lume should glow blue-green. Poor replicas have flat dials, wrong date font, or misaligned subdials.

Grey Side of the Moon Replica Watch Price Guide

Crystal and Strap

The crystal should be sapphire with anti-reflective coating on both sides. Clear AR reduces glare without a blue tint. The genuine watch comes on a grey leather strap with a ceramic deployant clasp. Replicas use generic leather or rubber. A good clone will have a strap that matches the grey tone and a clasp with correct engravings.

Parameter Bands to Expect

  • Case diameter: 44.25mm (genuine). Replicas should be within 0.5mm.
  • Thickness: 16.5mm (genuine). A7750-based replicas may be 17mm or more.
  • Lug width: 21mm.
  • Weight: Ceramic case should feel lighter than steel. Genuine is about 110g with strap. Replicas vary.
  • Movement: Clone 9300 or A7750. Clone 9300 is preferred for accuracy.
  • Power reserve: Genuine has 60 hours. Replicas vary, often 40 hours or less.
  • Water resistance: Genuine is 50m. Replicas may not be tested; avoid swimming.

Common Pitfalls

  • Sellers using the label Swiss made on replicas that are Chinese. The term Swiss replica is marketing, not a guarantee.
  • Photos that are stolen from genuine watch listings. Ask for timestamped photos.
  • Claims of 1:1 without proof. A true 1:1 clone is rare.
  • Cheap movements that fail after months. Look for reviews of the seller.
  • No return policy or warranty. Avoid sellers who do not offer returns.
  • Incorrect date wheel position or font.
  • Lume that is too weak or wrong color.

FAQ

Is a Grey Side of the Moon super clone worth the money?

It depends on your expectations. A high-tier super clone can look and feel close to the genuine, but it is not identical. If you want a watch to wear without worry, a super clone can be a good option. If you need perfect accuracy, buy the genuine.

How can I tell a super clone from a cheap fake?

Focus on the movement, case material, and dial details. A super clone will have a smooth sweeping chronograph hand, correct subdial functions, and a ceramic case with sharp finishing. A cheap fake will have a stuttering hand, painted subdials, and a steel case that is too heavy.

Can a watchmaker service a super clone?

Some watchmakers will service replica movements, but many refuse. Parts for clone movements can be hard to find. If service is important, consider a genuine watch or a high-end replica with a common movement like the A7750.

What is the difference between a super clone and a Swiss replica?

Swiss replica is a marketing term. A super clone is a higher grade of replica with better materials and movement. The best super clones are made in China with cloned movements. Swiss replica often means a lower-grade watch with a Swiss ETA movement, but quality varies.