A high quality replica AMVOX 2 is defined by three things: a pusher-free case that mimics the vertical trigger chronograph, a 44 mm profile with the correct lug and bezel proportions, and a dial with applied markers, recessed subdials and clean printing. When all three line up, the watch reads correctly on the wrist. When any one is off, the copy is obvious.
What the AMVOX 2 Is, in Short
The AMVOX line was developed by Jaeger-LeCoultre with Aston Martin, and the second generation moved the chronograph controls off the case band. Instead of pushers, the movement is triggered by pressing the sapphire crystal itself: firm pressure near 12 o'clock starts and stops the chronograph, and pressure near 6 o'clock resets it. That single design decision is what makes the watch recognizable from across a room, and it is also the hardest feature for replica makers to reproduce in a convincing way.
The original is a large, light watch in titanium or steel, roughly 44 mm across, with a black dial, luminous numerals and a slim bezel. A later DBS Transponder version packed a transmitter into the case back so the owner could lock and unlock an Aston Martin DBS with the watch. That variant is why the AMVOX 2 stays in demand among collectors and, by extension, why replica demand follows.
How to Spot a Fake AMVOX 2: What Gives It Away
Why the Vertical Trigger Matters Most
Most replica chronographs use standard pushers. A replica AMVOX 2 has to hide them. On better copies, the case band is clean and the chronograph is operated through the crystal or through a mechanism tucked under it. On cheaper copies, you will see stub pushers, a crown that does nothing, or subdial hands that never move because the movement is a basic three-hand quartz with decorative chronograph printing on the dial.
Check before buying:
- Ask for a short video showing the chronograph starting, stopping and resetting.
- Confirm whether the crystal press actually actuates the movement or the watch uses hidden pushers in the case band.
- Look for pusher shadows or seams in photos, which usually signal a generic case.
Case, Crystal and Finishing
Good replicas get the case architecture close: flat-topped lugs, a thin polished bezel, and a mix of brushed and polished surfaces that matches the contrast of the original. Titanium versions should look grayer and feel lighter than steel, though the difference is subtle in photos.
- Crystal: should be domed sapphire or, at minimum, a coated mineral crystal with an anti-reflective layer. Flat, hazy crystals are a giveaway.
- Case back: engraving should be crisp, centered and legible, with the Aston Martin wording and reference details placed correctly.
- Water resistance: treat replica watches as splash resistant only, no matter what a listing claims.
Dial Details That Give a Copy Away
The dial is where the price gap shows. On the original, the subdials sit in recessed wells, the applied markers catch light along their edges, and the printing is thin and sharp. Lower-grade copies use printed instead of applied markers, glossy flat subdials, a date window cut too wide or shifted off-center, and text that is either too bold or slightly blurred.
Compare a candidate against a clear photo of the genuine watch from the same angle. Marker length, the gap between the date window and the subdial, and the thickness of the minute track are the three fastest ways to spot a mismatch.
Movement Options
Replica AMVOX 2 watches generally fall into two groups. Quartz versions are cheap and keep the dial layout, but the chronograph sweep is stepped and the subdials behave nothing like a mechanical chronograph. Automatic versions cost more and copy the feel of the original, with a sweeping seconds hand and a working chronograph module. Decoration on the rotor and bridges varies widely and rarely matches the finishing of the genuine calibre, which is why a video of the watch running tells you more than a photo of the case back.
Strap, Clasp and Fit
Alligator-pattern leather is standard, and the strap should taper and sit flush against the lugs without gaps. Check that the buckle engraving is clean and that the spring bars are thick enough to hold a heavy case. A poor strap makes an otherwise solid replica look wrong straight away, and it is the cheapest part to upgrade.
Questions to Ask a Seller
- What is the exact case diameter and lug width?
- Is the chronograph operated through the crystal or through hidden pushers?
- Which movement is inside, and is it quartz or automatic?
- Can you send a video of the chronograph running and resetting?
- What is the return policy if the watch does not match the photos?
FAQ
Is a high quality replica AMVOX 2 worth buying?
It depends on what you want. If you want the design and the presence of the original without the price, a well-made replica delivers that. If you want mechanical finishing and long-term serviceability, a genuine watch or a comparable microbrand is the better path.
How can I tell a high quality replica AMVOX 2 from a cheap one?
Look at the case band first, then the dial. A clean case with no pushers and a working crystal-activated chronograph separates good copies from basic ones. Then check for applied markers, recessed subdials and sharp printing.
Do replica AMVOX 2 watches keep time?
Automatic versions typically keep reasonable time when regulated, and quartz versions are more accurate but less interesting to own. Neither should be trusted around water.