The quality of an Omega Globemaster 7407 clone depends almost entirely on the movement inside and the finishing of the case and dial. Ignore the '7407' label; it is a marketing term for a clone movement, not an official Omega caliber. Focus on the actual specs: a smooth sweeping seconds hand, correct date font, and a case that matches the original 39mm diameter and 12.8mm thickness.
What to Look For
Movement
The original uses Omega Calibre 8900 or 8901. Clones often use a modified ETA 2824 or a Chinese clone like the Hangzhou 6460 or Seagull ST2130. A good clone will have a beat rate of 28,800 vph (4 Hz) and a power reserve of at least 40 hours. Avoid 21,600 vph movements that stutter.
Globemaster 7407 Homage vs Replica: Pick and Options
Case
The Globemaster has a distinctive fluted bezel and a pie-pan dial. Check the bezel fluting for sharpness and consistency. The case should be 39mm wide, 12.8mm thick, with a lug width of 20mm.
globemaster 7407 replica price
Dial
The pie-pan dial has a raised center and sloping outer ring. The date window at 3 o'clock should have a correct font and no magnification. The hands should be polished and faceted.
Bracelet
The original comes on a leather strap or a steel bracelet with a butterfly clasp. Check for solid end links and a smooth clasp action.
Parameter Bands
- Case diameter: 39mm (acceptable range 38.5-39.5mm)
- Thickness: 12.8mm (acceptable 12.5-13.2mm)
- Lug width: 20mm
- Movement beat rate: 28,800 vph (4 Hz)
- Power reserve: 40-60 hours
- Crystal: Domed sapphire with anti-reflective coating on both sides
- Water resistance: 100m (if claimed, test carefully)
Common Pitfalls
- Misaligned bezel or dial markers.
- Cheap sapphire that is actually mineral glass.
- Date font too bold or thin.
- Rotor noise or gritty winding.
- Incorrect Globemaster text font on the dial.
- Poor lume that fades quickly.
FAQ
Is the 7407 a real Omega movement?
No. Omega uses the 8900/8901. '7407' is a seller term for a clone movement, often a modified ETA or Chinese caliber.
How can I tell if the clone has a genuine sapphire crystal?
Do a water drop test or use a diamond tester. Mineral glass will show scratches easily.
What is the biggest quality issue with these clones?
Inconsistent case finishing and poorly regulated movements. Ask for a timegrapher reading before purchase.
Can I service a clone movement?
Most watchmakers can service ETA clones, but Chinese clones may lack parts. Buy from a seller with a service warranty.