What Is an Omega Planet Ocean Ultra Deep Clone?
An Omega Planet Ocean Ultra Deep clone is a replica that copies the look of Omega's 6,000 m dive watch. It repeats the 45.5 mm case, the domed sapphire crystal, the ceramic bezel, and the bold dial with oversized markers. Prices run from about $150 to $450 based on the movement and the finish.
Replica Omega Planet Ocean Ultra Deep Ceramic Dial Guide
The clone copies the outside. It does not copy the inside: no Calibre 8912, no METAS Master Chronometer certification, and no 6,000 m depth rating.
replica omega planet ocean ultra deep vs seamaster
The Real Ultra Deep in Numbers
Omega released the production Ultra Deep in 2022, three years after a prototype touched the bottom of the Mariana Trench at 10,928 m. The retail watch keeps the same shape and trades the record for a 6,000 m rating that buyers can wear.
Replica Omega Planet Ocean Ultra Deep vs Seamaster
- Case: 45.5 mm wide, 18.12 mm thick, Grade 5 titanium or stainless steel
- Water resistance: 6,000 m (20,000 ft), tested to ISO 6425
- Crystal: domed sapphire with an inner anti-reflective coat
- Movement: Omega Calibre 8912, Co-Axial, Master Chronometer, 60-hour power reserve
- Bezel: ceramic with polished numerals and a full dive scale
- Retail: five-figure pricing at Omega boutiques
That 18.12 mm thickness drives the whole design. Few dive watches wear that tall, and it is the hardest number for a clone maker to hit.
Which Versions Show Up in the Replica Market
Omega sells the Ultra Deep in steel and in titanium, both with blue dials and blue ceramic bezels. The 2023 Summer Blue edition adds a light gradient dial. Clone factories follow the same path and offer steel and titanium cases with blue or black dials.
- Steel on bracelet: the most common clone. Heavier than the real titanium watch.
- Titanium: lighter and closer in feel. Clone titanium is often a lower grade with a lighter gray tone.
- Rubber strap: cheap to produce, so it shows up on budget builds.
- Summer Blue dial: a newer option. Print quality varies by factory.
How Close Does the Clone Get?
Good clones nail the silhouette. Case width, lug shape, bezel color, and dial layout land within a millimeter or two of the original. The gap shows up in thickness, weight, and finishing.
- Case and dial: the closest match. Most clones run 45 mm to 46 mm wide with correct dial text.
- Thickness: many clones sit at 15 mm to 17 mm. Slimmer cases mean a smaller movement and a caseback shape that does not match.
- Weight: steel clones feel heavy next to the titanium original.
- Bezel action: 120 clicks on both, but clone clicks feel loose and the ring has play.
- Lume: usable on $300+ models, weak and short-lived on budget builds.
- Caseback: the engraved seahorse and depth text read shallow on most clones.
What Movement Sits Inside?
Clone makers use off-the-shelf movements and decorate them to look like the Calibre 8912. The rotor gets an Omega-style engraving and the bridges get stripes or a Geneva pattern.
- Seiko NH35: common in the $150 to $250 range. Hacking, hand-winding, 41-hour reserve.
- Miyota 9015: thinner and smoother, often found in mid-tier builds.
- Clone 8900 or 8912: a decorated automatic with a fake Co-Axial look. Accuracy varies from watch to watch.
- ETA 2824 clone: easy to service and parts are common.
None of these movements carry METAS certification. Expect plus or minus 10 to 20 seconds a day out of the box, and ask the seller for a timegrapher reading.
Does the Clone Have 6,000 m Water Resistance?
No. A clone stamped 6,000 m on the caseback is rated on paper only. Real cases get pressure-tested one at a time; clone cases get a gasket and a quick seal check at best.
Treat clone water resistance as splash-proof. Pools, showers, and salt water are a risk. If a seller claims a 6,000 m clone passed a pressure test, ask for the certificate. Most have none.
- Confirm the stated rating before you buy: 30 m, 50 m, or 100 m.
- Budget $40 to $80 for a watchmaker to swap gaskets and test the case.
- Never dive with a clone, even a $450 one.
Price Tiers and What You Get
- $150 to $250: 316L steel, mineral or basic sapphire, NH35, stamped clasp, rough bezel action.
- $250 to $400: 316L or 904L steel, sapphire with AR coating, decorated movement, solid bracelet, sharp dial print.
- $400 and up: titanium options, closer case dimensions, cleaner engraving, tighter tolerances.
Spend on the case and the crystal first. A movement swap is cheap and simple. Fixing a bad case is not.
What to Check Before You Buy
- Case thickness. If it reads under 15 mm, the caseback profile is wrong.
- Dial print. Check the Seamaster text and the spacing on the depth line.
- Bezel insert. Cheap inserts fade, and the numerals sit flat instead of polished.
- Lume color. The original glows blue at night and looks white in daylight.
- Bracelet end links. Gaps at the lugs are the fastest tell.
- Seller photos. Ask for a wrist shot, a caseback shot, and a video of the bezel turning.
Will a Clone Fool an Expert?
No. Anyone who handles the real watch will spot a clone in seconds. The 18.12 mm case, the warm feel of titanium, and the movement finish under a loupe give it away.
Under a cuff at a dinner table, a good clone passes. That is the honest limit of the genre.
FAQ
Is an Omega Planet Ocean Ultra Deep clone worth it?
It is worth it if you want the look and accept the limits. Buy it as a style piece, not as a dive tool.
Can a watchmaker service a clone?
Yes, if it runs an NH35, Miyota, or ETA-style movement. Parts are cheap and any local shop can handle the work. A decorated clone movement is harder to source parts for.
How much should I pay?
$250 to $400 buys the best mix of case quality, dial print, and movement. Below $150 the bezel and lume show where the money went.
Does the clone come with a box and papers?
Most sellers ship a box and a card. The paperwork is not real Omega documentation and carries no value.