Patek Philippe Nautilus 5711/1G Replica Review
The 5711/1G is the white gold Nautilus. Patek Philippe built it with a blue dial, an 18k white gold case, and a matching gold bracelet. Retail was near $51,000 while it sat in the catalog. Real examples now trade above $200,000 on the secondhand market. That spread is the reason replica makers copy this reference.
Below are three replica builds sold by most dealers. Prices are asking prices from 2025 listings. Specs come from seller pages and from owner photos.
Patek Nautilus 5711/1G Fake Weight Comparison: What the Scale Tells You
Quick Pick
Buy the 3K-style case with the Dandong 324 clone movement. Price runs $650 to $900. Case width is 40 mm. Thickness runs 8.6 mm to 8.9 mm. Beat rate is 21,600 vibrations per hour, the same as the real calibre. Power reserve lands near 40 hours. It takes the win on dial pattern, bracelet taper, and profile height.
patek philippe nautilus 5711/1g replica review
The Real 5711/1G, In Numbers
- Case: 40 mm wide, 8.3 mm thick, 18k white gold.
- Dial: blue, horizontal embossed pattern, date at 3 o'clock.
- Movement: calibre 324 S C on early units, 26-330 S C on later units. Both run at 21,600 vph.
- Power reserve: 35 to 45 hours, by calibre.
- Water resistance: 120 m.
- Production: the 5711 line ended in 2021. The white gold 5711/1G had a shorter run than the steel 5711/1A.
What Changes Between Replica Builds
Five parts decide the outcome. Case thickness. Movement beat rate. Dial texture. Bracelet taper. Total weight. The case and the movement carry the most weight in a buying call.
is replica patek 5711/1g worth buying
Option 1: Miyota Build, $380 to $550
These use a Miyota 9015 or 8215 with a decorative plate on top. The 9015 runs at 28,800 vph, which is faster than the real calibre, so the seconds hand sweeps smoother than the watch it copies. Case thickness lands at 9.0 mm to 9.5 mm. Weight sits near 120 g on a full bracelet. Dial texture is printed, not embossed. This is the entry build.
Option 2: Dandong 324 Clone, $650 to $900
This movement copies the layout of the 324 S C. Beat rate is 21,600 vph. Power reserve is 40 to 45 hours. Case thickness lands at 8.6 mm to 8.9 mm, which is closer to the 8.3 mm real case. The dial uses an embossed pattern that catches light at an angle. Bracelet links taper from the case to the clasp and the center links are polished. This is the pick.
Option 3: "Swiss" Movement Claims, $900 to $1,400
Sellers list a Swiss ETA 2824 or a Swiss 324. An ETA 2824 runs at 28,800 vph. A real 324 S C runs at 21,600 vph. Ask for a movement photo and a timegrapher printout before you pay. Gold plating on these builds is listed at 3 to 5 microns. Plating wears first at the clasp, the lugs, and the crown.
Checks Before You Pay
- Ask for a caliper photo across the case flank. Above 9.2 mm the case looks tall from the side.
- Ask for a timegrapher reading. Rate within plus or minus 10 seconds per day, amplitude above 250 degrees, beat error under 0.3 ms.
- Ask for a weight on a scale. Steel builds land near 120 g. Tungsten builds land near 150 g. Real white gold examples run 145 g to 170 g, based on owner reports and link count.
- Check the date font. Many replica date wheels use a wide 1 and a flat 4. The real dial uses a narrow 1.
- Check the bracelet. Ask for a top-down photo of the full bracelet on a flat surface. Look for a straight taper and even gaps at the links.
- Confirm the warranty. Most dealers list 6 to 12 months on the movement.
Bottom Line
The Dandong 324 build at $650 to $900 is the one to buy. It matches the beat rate, the case height, and the dial pattern of the real 5711/1G. The Miyota build saves $200 and loses accuracy in the profile and the sweep. The $900-plus tier buys plating and a Swiss label, not a better case. Ask for photos and numbers before payment. No replica equals the real watch in gold content or in finish.