What Is a Replica Rolex 124060 Super Clone?
A replica Rolex 124060 super clone is a high-grade copy of the 41mm no-date Submariner, built to match the original case shape, ceramic bezel, and black dial while running a third-party automatic movement instead of Rolex caliber 3230. The term super clone means the maker copies the case dimensions, bracelet, crystal, and dial printing to match the reference, not just the general look. Street prices for these builds land between about $350 and $700.
buy rolex 124060 replica cheap
Cheaper copies sell for under $150. They look right in a photo and wrong on the wrist.
Rolex 124060 vs 114060 Replica: Which No-Date Sub to Buy
Reference Specs: The Watch Being Copied
Rolex launched the 124060 in 2020 as the 41mm no-date Submariner. It replaced the 114060, which measured 40mm. Real numbers make inspection easier.
where to buy replica rolex 124060
- Case: 41mm diameter, 21mm lug width, stainless steel
- Movement: caliber 3230, 70-hour power reserve
- Bezel: unidirectional, black ceramic insert
- Crystal: flat sapphire, no cyclops
- Water resistance: 300 meters
- Dial: black lacquer, blue-glowing lume on hands and hour markers
Because the 124060 has no date, there is no date window and no magnifier on the crystal. A copy with a cyclops is copying the wrong reference.
Replica Rolex 124060 Ceramic Bezel: Buyer's Inspection Guide
What Separates a Super Clone From a Cheap Copy?
Three parts decide the quality tier: the case and bezel, the movement, and the dial and crystal.
Case and Bezel
Top builds machine the case from 904L-grade stainless, the alloy family Rolex calls Oystersteel. Budget copies use 316L, which looks close but polishes to a different tone.
Check the lugs. On the 124060 they are slim, and the case sides taper toward the bracelet. Thick lugs with sharp edges point to a low-tier case.
The bezel insert should be ceramic with engraved and filled markers. Aluminum or painted inserts fade and scratch. The bezel should click 120 times with no backplay.
Movement
Cheap builds use a basic 2824 clone or a decorated quartz. Mid-tier builds use a 3135 clone, which adds a date position the 124060 does not need. Better builds use a no-date 3130-style clone or a 3230 clone, so the crown has just two positions.
Look for hacking, hand winding, and 28,800 vibrations per hour. A sweep that stutters is a bad sign.
Dial and Crystal
Dial printing should be crisp, with even spacing and no bleeding at the edges. The lume should glow blue, not green. The crystal should sit flat on the case with no dome and no green tint at the edges.
Bracelet and Clasp Details
The Oyster bracelet has three-piece links and a Glidelock-style clasp with about 20mm of adjustment. Good copies match the link count, the brushed and polished finishes, and the clasp stamping.
Check solid end links. A visible gap between the case and the first link is the easiest flaw to spot from across a table.
Water Resistance and Wearability
Factories list 300 meters, but few test it. Gasket quality and caseback torque vary from unit to unit. Have a watchmaker pressure test yours before you swim. Until then, keep it dry.
On the wrist, a correct 41mm Submariner build weighs around 150 to 160 grams on a full bracelet. If it feels light, the case or bracelet is hollow.
Price Tiers for 124060 Super Clones
- Under $150: 316L case, printed bezel, low-beat movement, weak lume.
- $200 to $350: decent case, ceramic insert, 2824 or 3135 clone, average dial.
- $350 to $700: 904L case, no-date correct movement, better bracelet and lume.
- $700 and up: 3230 clone, top dial and crystal, closest match to the reference.
These are general market ranges. Prices move with supply and with the specific factory batch.
Quick Inspection Checklist
- Count the bezel clicks. You want 120, with no wobble.
- Check the rehaut engraving. It should line up under each hour marker.
- Test the lume in a dark room. Blue glow, not green.
- Wind the crown. Smooth, with no grit or grinding.
- Weigh the watch. Under 140 grams on a bracelet is a warning.
- Look at the end link fit. Any gap is a tell.
What a Super Clone Is Not
It is not a Rolex. There is no factory serial, no Rolex warranty, and no Rolex service support. Resale value is close to nothing.
Counterfeit watches with brand logos are illegal to sell in many countries, including the United States. Buy and own with that in mind.
A watchmaker who handles real Submariners will spot a replica under a loupe. Font weight, crystal height, and crown profile give it away.
FAQ
Is a replica 124060 super clone worth buying?
If you want the no-date Submariner look on a budget, a $400 to $600 build delivers it on the wrist. If you need water resistance, service, or resale value, it delivers none of those.
Do super clones use real 904L steel?
Some do, and some only claim to. Ask the seller for the alloy and check the polish. 904L takes a deeper shine and resists corrosion better than 316L, though few buyers can tell by eye.
Can a jeweler tell the difference?
Yes. Movement finish, caseback threads, and dial printing are hard to fake. That is also why most watchmakers decline to service a replica.
How long does a 124060 super clone last?
A clone movement kept clean and serviced every few years can run for a decade. A neglected one may stop within two or three years.
Does the 124060 replica have a date window?
It should not. The reference is a no-date Submariner, so a correct build has no date, no cyclops, and a two-position crown.