Answer first
Clone Reverso Tribute Monoface watches use a hand-wound Asian movement, most often a 21,600 vph caliber with a 40 to 45 hour power reserve. The caseback is solid steel with engraved horizontal lines. Genuine watches use Calibre 822. Clone movements copy the layout at a distance and do not match part for part.
Reverso Tribute Monoface Copy for Sale With Box and Papers
Genuine baseline
Jaeger-LeCoultre Reverso Tribute Monoface measures 45.6 mm by 27.4 mm. Thickness is 8.5 mm on the Small Seconds version. Calibre 822 has 108 components, 21 jewels, 21,600 vph, and 45 hours of power reserve. The caseback is closed. It shows the Reverso engraving on a plain steel surface.
Is the Reverso Tribute Monoface Replica Accurate to the Real Watch?
What clones use
Most clones run a Chinese hand-wound movement. Two families show up: a 6497-derived layout and a purpose-built slim hand-wind. Both beat at 21,600 vph. Power reserve lands near 40 hours. Winding feel is coarser than Calibre 822. The click spring is louder. Case thickness runs 9 to 10 mm on many clones, above the 8.5 mm target.
fake reverso tribute monoface vs original
Accuracy of the movement finish varies. Bridges may show Geneva stripes that are stamped, not applied. Screw heads sit proud of the bridge on lower grades.
Caseback checks
- Engraving depth: genuine lines are cut, clone lines are laser etched and shallow.
- Font: the Reverso wordmark spacing differs. Clone letters sit wider.
- Line count and spacing: count the horizontal lines and compare to the reference.
- Caseback fit: a clone back often sits above the case edge by 0.1 to 0.3 mm.
- Screws: four caseback screws on the genuine. Clone screws may use a different thread pitch.
Movement identification points
Look at the balance cock shape and the regulator index. Calibre 822 uses a specific bridge outline. Clone bridges cut corners near the balance. Jewel count on clones is often not marked. Serial and caliber stamps sit in different positions.
Data on clone movements is not published. Counts and specs above come from teardown reports, not factory sheets.
Limits
No clone matches Calibre 822 in finish, service parts, or timing stability. Caseback engraving quality is the fastest visual check.