Answer
A Speedmaster 1957 third generation super clone is a replica of the Omega Speedmaster 1957 reissue. The “third generation” label comes from sellers, not Omega. It points to a later case and dial version in the replica line. The watch is not an Omega product. Its value rests on case shape, dial print, chronograph function, and movement quality. Ask for photos of the movement, caseback, and dial before you pay.
omega speedmaster 1957 third generation replica review
What “1957 third generation” means
Omega launched the Speedmaster in 1957. The first reference was CK2915. It had a steel tachymeter bezel, broad arrow hands, and a manual-wind chronograph movement. Omega has reissued the 1957 look in limited runs. Sellers use “third generation” for a replica that copies a later reissue. The term has no Omega catalog number. Confirm the reference the seller claims to copy.
Are Speedmaster 1957 3rd Gen Replica Watches Worth the Investment?
Check the case and lugs
The 1957 Speedmaster case has straight lugs and a thin bezel. A good replica should match the lug shape, lug width, and case diameter. Measure the case. Ask for caliper photos. Look at the lugs from the side. A common fault is a thick case or soft lug edges. The crown and pushers should sit at the right height. The pushers should have a firm start and return.
Where to Buy a Speedmaster 1957 3rd Generation Replica
Check the dial and hands
The dial should show three registers, a tachymeter scale, and applied markers. On the 1957 style, the broad arrow hands are a key detail. Check the print under a loupe. Bad print has blur, uneven spacing, and thick strokes. The subdial rings should be sharp. The lume color should match the hands and markers. A “third generation” replica may use a flat dial or a stepped dial. Confirm which one the seller offers.
replica speedmaster 1957 3rd gen vs original
Check the bezel
The original 1957 Speedmaster used a metal bezel with a tachymeter scale. Later Speedmaster models used other bezel types. A replica may use a ceramic insert or a steel insert. Ask for the material. Check the scale alignment at 12 o’clock. The bezel should turn with firm clicks. A loose bezel or a misaligned scale is a fault.
Check the movement
The Speedmaster 1957 is a manual-wind chronograph. A super clone at low cost often uses a Seagull ST19 or a related Chinese chronograph. A true clone of Omega Caliber 321 or 1861 is rare. Ask for a movement photo and a video of the chronograph start, stop, and reset. The chronograph hand should return to zero. The pushers should not stick. A running seconds hand at 9 o’clock is normal for this layout. Check the power reserve. Ask about service parts.
Check the caseback and numbers
The caseback should have the correct engraving depth and font. The hippocampus and text should sit in the right place. Replica sellers may use a display caseback when the original has a solid back. Ask for both sides. Serial numbers on replicas do not prove origin. They show what the factory printed. A photo of the inside caseback can show machining marks.
Red flags
- No movement photo.
- No video of the chronograph reset.
- “1:1” claims with no measurements.
- Price far below the normal replica range.
- Seller refuses returns.
Price and risk
Replica prices vary by factory, movement, and finish. A low-grade Speedmaster replica can sell for under $200. A higher-grade replica with a better chronograph can sell for several hundred dollars. The price does not prove quality. Check the build, not the label. Buying or selling a replica can violate trademark law. Customs can seize the item. Keep that risk in mind.